Wednesday, May 22, 2013
Art work by Alex Prihodko -
PTU Scrapkit Pompons and Fun by PO Concepts
Please visit her blog for a list of stores she sells in
New trasnparent Raster layer 650x650
You can crop out any un needed space
Open element 18 copy and paste as new layer
Place center bottom
Open paper 25 copy and paste as new layer
move below frame and erase all parts on the outside
open your tube copy and paste as new layer
Place as desired below the frame duplicate if needed and merge
Erase all parts on the outside
add a luminace legacy
Open the tube again copy and paste as new layer
resize down 4 times by 80%
Mirror and move above all other layers
Open element 29 copy and paste as new layer
resize down by 60% 2 times
Move above all other layers and to the right
open element 110 copy and paste as new layer
resize down 1 time by 60%
Move to the top right below the tube layer
Open element 109 copy and paste as new layer
Move below the tube layer and in the center
Open element 63 copy and paste as new layer
resize down by 60% 2 times and move top center below the legs of the tube
Open element 17 copy and paste as new layer
resize down 1 time by 80%
Move to the left below the tube layer
Open element 42 copy and paste as new layer
resize down 2 times by 60%
Move to the left below element 17
open element 118 copy and paste as new layer
Resize down 2 times by 60% and move to the right below the tube layer
open element 93 copy and paste as new layer
resize down 1 time by 60% and move above all other layers
Placing in the center
Open element 76 copy and paste as new layer
resize down 1 time by 60% and move to the bottom right below the tube layer
add name copyright and save
Tuesday, May 21, 2013
Tube by Anna Marine , You can purchase as well as a license to use at CDO
Pay to Use Scrapkit Deadly Desires by Wicked Princess Scraps
Visit her blog for a complete list of stores she sells in
New transparent Layer 650x650
open frame 9 copy and paste as new layer
Place in the center
Open paper 10 copy and paste as new layer
Move below the frame layer and erase all parts on the outside
Open the tube layer copy and paste as new layer
move below the frame and to the right
Mirror and move as needed
erase all parts on the outside
add a luminance legacy
Open full length tube copy and paste as new layer
Duplicate frame and move the tube between the frames to the right
Erase the part of the frame that is covering the tube
Open ribbon 5 copy and paste as new layer
resize down by 80% about 3 times
Flip, Mirror and move to the bottom above all other layers
open crowtime copy and paste as new layer
resize down 2 times by 80% and move to the left below the ribbon layer
open book 5 copy and paste as new layer
reszie down 4 times by 80% move to the left above all other layers
open the voodoodoll copy and paste as new layer
Wednesday, May 15, 2013
Artwork VeryMany You can purchase at Pics For Design
PTU scrap kit In a Summer Breeze by Freeks Creations
PTU scrap kit In a Summer Breeze by Freeks Creations
Available at Mystical Scraps
New Transparent raster layer 650x650
Open frame2 copy and paste as new layer
resize down 3 times by 60% and place in the center
Open paper 5 copy and paste as new layer
Resize down 3 times by 60% and move below the frame
erase all parts on the outside
open your tube and copy and paste as new layer
resize down 1 time by 60% move below the frame layer
to the left, erase all parts on the outside
add a luminance Legacy
Open tube again copy and paste as new layer
resize down 2 times by 60% and mirror and move to the right
above all other layers
Open the mushrooms copy and paste as new layer
resize down 4 times by 60% , mirror and move to the left
above all other layers
Open the grass blades copy and paste as new layer
resize down 4 times by 60% Mirror and move to the right below the full tube layer
duplicate and move to the left below the mushrooms
open ribbon 2 copy and paste as new layer
resize down 3 times by 60%
Flip and move to the bottom below all other element layers
open the bubbles copy and paste as new layer
resize down 4 times by 60%
Move directly above the frame layer to the bottom
open the ribbon copy and paste as new layer
resize down by 60% 3 time and move to the bottom above ribbon 2
open the word art copy and paste as new layer
Move above all other layers and resize down 4 times by 60%
open the kitten copy and paste as new layer
Move above all other layers
resize down 5 times by 60%
place bottom center
add name copyright and save
Monday, May 13, 2013
*Written on 5.13.13, by Scribbles using my own mind and creativity
any similarities is completely coincidental. *
Artwork of Ninaste , you can find HERE
Matching PTU Scrapkit by Tiny Turtle Designs
Frame of choice, I am using one I made
Mask of Choice - I am using one from the Creative Misfits
Mask of Choice - I am using one from the Creative Misfits
Font of Choice, I am using a FTU font called Marguerite
New Transparent Raster Layer 650x650
Open frame copy and paste as new layer
Open paper 6 copy and paste as new layer
move below all other layers and erase all parts on the outside of frame
Add a drop shadow to the frame
Open your tube copy and paste as new layer
place as desired and duplicate Mirror to the left and place as desired
Merge down and erase all parts on the outside of the frame
add a luminance legacy
open your tube layer again copy and paste as new layer
resize down 2 times by 80% and move to the left above all other layers
open element 140 copy and paste as new layer
resize down 2 times by 60%
Move below tube layer and to the left
Repear with element 139
Mirror and move to the right
Merge down
open element 122 copy and paste as new layer
resize down 1 time by 60% and move below element139 and 140
Keep slightly above both
open element 1 copy and paste as new layer
resize down 2 times by 60% move to the center left above all other layers
open element 7 copy and paste as new layer
resize down 3 times by 60%
Move below the tube layer and to the right of it
open elemen 112 copy and paste as new layer
resize down 2 times by 60%
Move to the right above the tube layer
Open element 136 copy and paste as new layer
resize down 3 times by 60% and move to the right
above the tube layer
open element 55 copy and paste as new layer
resize down 3 times by 60% and move to the left
below the tube layer near the bottom
Duplicate and mirror
Move to the right below element 7
Open Paper 28 copy and paste as new layer
Move below all other layers
Go to layer, New mask layer
from image select from dropdown, Hit ok
Merge group
open element 59 copy and paste as new layer
resize down 3 times by 60%
Move to the left below the star
add name copyright and save
New Transparent Raster Layer 650x650
Open frame copy and paste as new layer
Open paper 6 copy and paste as new layer
move below all other layers and erase all parts on the outside of frame
Add a drop shadow to the frame
Open your tube copy and paste as new layer
place as desired and duplicate Mirror to the left and place as desired
Merge down and erase all parts on the outside of the frame
add a luminance legacy
open your tube layer again copy and paste as new layer
resize down 2 times by 80% and move to the left above all other layers
open element 140 copy and paste as new layer
resize down 2 times by 60%
Move below tube layer and to the left
Repear with element 139
Mirror and move to the right
Merge down
open element 122 copy and paste as new layer
resize down 1 time by 60% and move below element139 and 140
Keep slightly above both
open element 1 copy and paste as new layer
resize down 2 times by 60% move to the center left above all other layers
open element 7 copy and paste as new layer
resize down 3 times by 60%
Move below the tube layer and to the right of it
open elemen 112 copy and paste as new layer
resize down 2 times by 60%
Move to the right above the tube layer
Open element 136 copy and paste as new layer
resize down 3 times by 60% and move to the right
above the tube layer
open element 55 copy and paste as new layer
resize down 3 times by 60% and move to the left
below the tube layer near the bottom
Duplicate and mirror
Move to the right below element 7
Open Paper 28 copy and paste as new layer
Move below all other layers
Go to layer, New mask layer
from image select from dropdown, Hit ok
Merge group
open element 59 copy and paste as new layer
resize down 3 times by 60%
Move to the left below the star
add name copyright and save
Thursday, May 9, 2013
PTU Kit by Fiona Devil's Creations Red white Blue.
You can visit her blog for stores she sells in
Masks of choice at least 2 of them
New Transparent Raster Layer 650x650
Open element 23 copy and paste as new layer
Resize up 2 times by 105%
Open element 24 copy and paste as new layer
Place in the center of element 23
Open paper 2 copy and paste as new layer
Move below all other layers
Go to layer, New mask Layer From image,
select from Drop down, Hit OK
Repeat with paper 11 using a different mask
Open your tube and grab your close up
Copy and paste as new layer
Move below element 23
Erase all parts on the outside
duplicate and hide duplicate layer
highlight the original add a Gaussian blur to liking
unhide duplicate and add an overlay
Open the full length tube layer copy and paste as new layer
Mirror and move to the right
duplicate element 24 and move above tube layer
erase parts of the tube that is on the bottom of the frame
Erase the parts of the frame that covers the tube
Open element 25 copy and paste as new layer
resize down 2 times by 65% and move to the right above all other layers
open element 26 copy and paste as new layer
resize down 3 times by 65% and move to the right above element 25
Open element 6 copy and paste as new layer
resize down 2 times by 65% and move to the right above all other layers
open element 12 copy and paste as new layer
resize down 1 time by 65%
Move below element 25
repeat with element 13 but move this one slightly below element 12
open element 36 copy and paste as new layer
resize down 1 times by 65% and then again by 80%
Move to the left below element 12
open element 5 copy and paste as new layer
resize down 3 times by 80% and move to the left
below element 36
open element 8 copy and paste as new layer
Resize down 1 time by 65%
Move to the left above all other layers to the right of the cupcake
open element 11 copy and paste as new layer
resize down by 65% 2 times
Move to the center left
below all other element layers
add name copyright and save
New Transparent Raster Layer 650x650
Open element 23 copy and paste as new layer
Resize up 2 times by 105%
Open element 24 copy and paste as new layer
Place in the center of element 23
Open paper 2 copy and paste as new layer
Move below all other layers
Go to layer, New mask Layer From image,
select from Drop down, Hit OK
Repeat with paper 11 using a different mask
Open your tube and grab your close up
Copy and paste as new layer
Move below element 23
Erase all parts on the outside
duplicate and hide duplicate layer
highlight the original add a Gaussian blur to liking
unhide duplicate and add an overlay
Open the full length tube layer copy and paste as new layer
Mirror and move to the right
duplicate element 24 and move above tube layer
erase parts of the tube that is on the bottom of the frame
Erase the parts of the frame that covers the tube
Open element 25 copy and paste as new layer
resize down 2 times by 65% and move to the right above all other layers
open element 26 copy and paste as new layer
resize down 3 times by 65% and move to the right above element 25
Open element 6 copy and paste as new layer
resize down 2 times by 65% and move to the right above all other layers
open element 12 copy and paste as new layer
resize down 1 time by 65%
Move below element 25
repeat with element 13 but move this one slightly below element 12
open element 36 copy and paste as new layer
resize down 1 times by 65% and then again by 80%
Move to the left below element 12
open element 5 copy and paste as new layer
resize down 3 times by 80% and move to the left
below element 36
open element 8 copy and paste as new layer
Resize down 1 time by 65%
Move to the left above all other layers to the right of the cupcake
open element 11 copy and paste as new layer
resize down by 65% 2 times
Move to the center left
below all other element layers
add name copyright and save
Tuesday, May 7, 2013
PTU Scrap Kit is Emo Gangsta by Toxic Desirz
Visit her blog for a list of stores she sales in
Tube is Candy by Ninaste
Masks from the Creative Misfits Blog
New transparent Raster Layer 650x650
open the filmstrip copy and paste as new layer
Resize down 1 time by 80%
Free Rotate to the right by 65%
Duplicate and mirror
Erase the parts that are over lapping
i just erase the part of the top frame that was in the bottom frame
add a drop shadow to both frames
Open paper 1 copy and paste as new layer
Move below all other layers and erase all parts on the outside
Open Paper 11 copy and paste as new layer
Move below all other layers
Go to layer, new mask layer from image
select from drop down
hit ok, Merge group
Repeat with Paper 18 using a different mask
Open tube layer copy and paste as new layer
Place inside the frames as desired
Erase all parts on the outside
Merge if needed and Duplicate and mirror
Merge both side together Duplicate
Highlight the original and add a Gaussian blur to liking
highlight the duplicated layer and add an overlay
open your tube layer again
copy and paste as new layer
Resize down by 80% 2 times and again by 90%
Move to the left alittle above all other layers
open the sparkles copy and paste as new layer
move below the tube layer
grab the erase and run over the part of the sparkles on the Background
No need to worry about the rest
Open the car copy and paste as new layer
resize down by 90% 1 time and again by 80% about 3 times
Mirror and move to the right below the tube layer
open the diamond copy and paste as new layer
resize down 4 times by 80%
Move below the tube layer and in the center
open the skull copy and paste as new layer
Resize down by 60% about 3 times
Move to the top of the diamond and to the right
see mine for placement
Open the flame copy and paste as new layer
resize down 3 times by 60%
Move below the car, Duplicate and move that one to the left
open the teddy copy and paste as new layer
resize down 4 times by 60% and move above all other layers infront of the car
open the gun copy and paste as new layer
Resize down 2 times by 60%
free rotate to the right by 45%
Mirror and flip
Move below the car layer
open the crown copy and paste as new layer
resize down by 60% 1 time
Move below the flames
open the bullets copy and paste as new layer
Move below the tube layer
resize down by 60% about 2 times
open the razor copy and paste as new layer
resize down 1 time by 60%
move to the left center
Below the crown
free rotate to the right by 45%
open flower 3 copy and paste as new layer
resize down 3 times by 60% Move below the car layer and to the center right by the frame
repeat with flower 1
add name copyright and save
New transparent Raster Layer 650x650
open the filmstrip copy and paste as new layer
Resize down 1 time by 80%
Free Rotate to the right by 65%
Duplicate and mirror
Erase the parts that are over lapping
i just erase the part of the top frame that was in the bottom frame
add a drop shadow to both frames
Open paper 1 copy and paste as new layer
Move below all other layers and erase all parts on the outside
Open Paper 11 copy and paste as new layer
Move below all other layers
Go to layer, new mask layer from image
select from drop down
hit ok, Merge group
Repeat with Paper 18 using a different mask
Open tube layer copy and paste as new layer
Place inside the frames as desired
Erase all parts on the outside
Merge if needed and Duplicate and mirror
Merge both side together Duplicate
Highlight the original and add a Gaussian blur to liking
highlight the duplicated layer and add an overlay
open your tube layer again
copy and paste as new layer
Resize down by 80% 2 times and again by 90%
Move to the left alittle above all other layers
open the sparkles copy and paste as new layer
move below the tube layer
grab the erase and run over the part of the sparkles on the Background
No need to worry about the rest
Open the car copy and paste as new layer
resize down by 90% 1 time and again by 80% about 3 times
Mirror and move to the right below the tube layer
open the diamond copy and paste as new layer
resize down 4 times by 80%
Move below the tube layer and in the center
open the skull copy and paste as new layer
Resize down by 60% about 3 times
Move to the top of the diamond and to the right
see mine for placement
Open the flame copy and paste as new layer
resize down 3 times by 60%
Move below the car, Duplicate and move that one to the left
open the teddy copy and paste as new layer
resize down 4 times by 60% and move above all other layers infront of the car
open the gun copy and paste as new layer
Resize down 2 times by 60%
free rotate to the right by 45%
Mirror and flip
Move below the car layer
open the crown copy and paste as new layer
resize down by 60% 1 time
Move below the flames
open the bullets copy and paste as new layer
Move below the tube layer
resize down by 60% about 2 times
open the razor copy and paste as new layer
resize down 1 time by 60%
move to the left center
Below the crown
free rotate to the right by 45%
open flower 3 copy and paste as new layer
resize down 3 times by 60% Move below the car layer and to the center right by the frame
repeat with flower 1
add name copyright and save
Subscribe to:
Posts
(Atom)
STAMPS
